https://www.leevalley.com/en-us/shop/tools/jigs-guides-and-fixtures/597…
This is a great tool for control freaks. Here's some highlights from their website.
The LS Positioner is made from anodized aluminum and is micro-adjustable for precise fence placement (within 0.002" over the full range), and a wheel micro-adjusts in 0.001" increments during set-up.
This will allow us to create battery based projects such as DIY battery banks or power backups. Heat based soldering guns can be dangerous when used on batteries, but a quick spot weld pulse is much safer.
For example this unit: https://www.amazon.com/SUNKKO-Battery-Welding-Soldering-Machine/dp/B01J…
Holdfasts are very handy to hold things firmly to the bench. Currently, we only have two.
3/4" diameter https://www.etsy.com/listing/558152083/holdfast-bench-dog-hold-fast-woo…
The one that we have is very very old and cannot be set up correctly. A jointer plane can be used to flatten long boards, with a finish much nicer than the planner or the jointer, not requiring sanding afterwards. Plus it can flatten very wide panels that don't fit in the planner or even the sander.
https://www.woodcraft.com/products/woodriver-7-jointer-plane?via=573621…
To mark parallel lines in wide wood panels. It can also be used to trim thin material like cardboard or veneer to size.
https://www.leevalley.com/en-us/shop/tools/hand-tools/marking-and-measu…
Some of the scissors in the textile section require sharpening and this jig would make it quite easy to sharpen them in the Tormek
https://www.rockler.com/scissors-jig-svx-150-for-tormek-t-7-sharpening-…
To trim and fit board ends with high accuracy. Additionally, this shooting board can be used also at a precise angle which would allow cutting very precise miters, for example for picture frames.
https://www.leevalley.com/en-us/shop/tools/jigs-guides-and-fixtures/110…
Project Idea
The idea for this project was to utilize the (awesome!) large format printer to make prints for myself and others. One of the downsides I've found with framing things (especially large prints) is that the frames become quite ungainly to transport/move with. The aim with this project was to make a system that was more portable and simple - i.e. no glass to break, etc. The canvas material is perfect for this!
