Skip to main content

Bridgeport Mill Training

-

Member for

4 years 11 months
Member profiles
Location

MakeHaven Main Space

The main makerspace and connected shops. This is located at 770 Chapel Street. Registered participants should ring the MakeHaven labeled doorbell. They will be directed down a long hallway, and down a set of stairs to our basement workshop.

Terms and Conditions (click to expand)

All participants must be 18 years of age or older.

Refunds must be requested 72 hours in advance of class. Cancellation after will result in forfeit of registration fee.

Arrival more than 15 minutes late will result in not being able to participate.

Participants must sign MakeHaven waiver to participate.

Tags

Hands on learning of the fundamentals of safe and practical use of a Bridgeport Milling Machine.


 

About this Event


Students who successfully compete this class will earn the Bridgeport Mill badge, allowing ongoing use for members. No previous experience required.

The Learning Objectives are as follows:

  • Identify the locations and function of the milling machine's E-stop
  • Identify and demonstrate proper use of Personal Protective Equipment (PPE)
  • Explain and Identify Lock Out-Tag Out procedure and guidelines for the milling machine
  • List/adhere to all shop/lab safety rules established by Make Haven
  • Identify the location and function of the components on the mill
  • Demonstrate safe insertion and removal of cutting tools
  • Demonstrate adequate clamping/fixturing procedure of work-piece
  • Demonstrate proper start up and speed selection sequence for both belt driven and variable-speed spindles
  • Identify and confirm proper spindle rotation for intended cutting tool
  • Identify and explain the function of machines preventative maintenance (TPM) requirements
  • Demonstrate the accurate and safe squaring of the machine's vise
  • Demonstrate and explain the need for accurate edgefinding of a workpiece
  • Demonstrate proper care and use of precision measuring tools (dial indicator, micrometer, dial caliper)
  • Reference the Machinists Handbook for proper tool selection / cutting speeds and feeds.

 

This is an in-person, hands-on class. Partipants will be required to wear a mask covering the nose and mouth and keep distanced. Anyone experiencing symptoms of COVID-19 or with a recent exposure will be asked to reschedule. Complete guidelines for the space use at this time can be found at makehaven.org/pandemic