To enable music audio production.

Interface - PreSonus Quantum 2626 26x26 Thunderbolt 3 Audio Interface = $700

Control Surface - Presonus Faderport 16 = $1000

Instruments/MIDI Controllers - N.I. KOMPLETE KONTROL S61 (MK2 NOT Mk1) = $800

Universal Editing Tool (Macros) - 32 key Streamdeck XL = $250

Audio Monitors Testing & Calibration - Sonarworks SoundID Reference = $300

Headphone Monitors - Beyerdynamic DT770Pro = $160

Total =$3,210

Especially now that we’re developing a ceramics area, this would be a great synergy between 3D printing and ceramics. This way we can print very, very complicated and precise parts with the ceramic resin, and then fire them to yield a purely ceramic part. One of the few FormLabs resins that can (through firing) be considered food safe.

https://formlabs.com/store/materials/ceramic-resin/
$149 for 1L of resin
$149 for a resing tank
$99 for a build platform

Our current spindle/belt sander is pretty meh. Would be great to get an upgrade! https://www.jbtools.com/woodstock-international-w1686-1-hp-oscillating-…

It would be great to designate an area of the cutter for smaller pieces and install a catching system like this. Recommended by Joel Greenwood
https://www.barton.com/waterjet-cutting-bricks-hydrobloc-superbricks/

With MH's excellent lending library, I have /almost/ all the tools I need to remove my Prius hybrid battery; the one exception seems to be a torque wrench that works in the low ft-lb range (20-30 ft-lb), which is required for re-tightening certain bolts when re-installing the battery. This would fill a gap in the current torque wrench options (have: 40-200 in-lb and 50-250 ft-lb; missing: 200-600 in-lb aka 17-49 ft-lb range), and would be helpful to me & perhaps other future Prius DIYers :-)