Material Location
The Store
Unit Cost
$52.00
Unit
1 kit (box)
Interest Area Categories
Material Purchase Unit
1 box trial kit
Material Unit Purchase Cost
$38.20
Platinum Cure Mold Rubber Brushable Silicone Rubber
Rebound™ 25 & Rebound™ 40 are easy-to-use silicone rubbers that self-thicken for making brush-on molds of almost any model. Rebound™ can be applied with a brush or spatula to vertical surfaces without sagging and will cure to a soft, flexible rubber. Rebound™ 25 is good for making molds of models with deep undercuts and, depending on model configuration, can be inverted as a glove molds. Rebound™ 40 is harder and less flexible. Adding Thi-Vex™ Silicone Thickener allows for the creation of registration keys and cut shims in the mold.
Brushable Shore 40A Hardness Platinum Silicone Rubber Compound. 1A:1B Mix Ratio - No Scale Required.