LNS MODEL 150A
SHOT CAPACITY: 1.0 cu in / 16 grams (PS)
MAX TEMPERATURE: 500 deg F. (260 deg C)
MAX MOLD (OUTSIDE): 8.0"W x 5.0"H x 5.0"D
Instructions for Use:
***Required Safety Glasses and Gloves***
Manual: https://www.scu.edu/media/school-of-engineering/pdfs/maker-lab-resources/Manual_InjectionMolder.pdf
Step by step:
- Create a mold
- Mold Making Tips: http://www.seattlerobotics.org/encoder/mar97/mold_art/molds.htm
- Pre heat the mold to warm to the touch using an electric plate stove (about 130F).
- Load pellets. Set temperature for the material.
- Example: PLA = 360F - 375F
- For more materials go to http://plastictroubleshooter.com/ThePlasticTroubleshooter/melt_temps.htm
- Align the mold (nozzle clearance should be about 0.5" from mold).
- Do a single, fast, strong press.
- With gloves remove mold, check results.
FAQ at: https://www.techkits.com/pages/faqs/
Video: https://www.techkits.com/collections/videos/
Instructional Video:
Information Plate:
Item Area Interest:
Item Hazard Band:
Hazard Class 1 - Minor injuries, addressable with basic first aid kit or ice.
Status:
Associated Slack Channel :
#plastics #preciousplastic